Epoxy garage floor coating can enhance your garage. There is all-in-one kit that has everything you need to prep, coat and customize your garage floor. Your can have the garage floor is ready for full use by applying epoxy coating in just three days. It is a thing for sure also great for concrete and other commercial floors. You can do it yourself in epoxy coating that will make you able in saving and money. Just follow these steps by steps in how to do garage floor coating with epoxy paint.
First step, Pour mixed floor coating thoroughly into a bucket and dip into the coating a quality 2″-2½” wide nylon/polyester brush. In order to avoid drips, just tap off any excess of coating against the inside bucket wall! Step two, Use brush to paint (cut in) a 2″-3″ wide area around the floor’s perimeter. Just start in a corner and then continue along the wall’s edge. Step three, Pour the floor coating from the bucket into a tray of paint. Then work a roller into the tray of paint until it is fully coat loaded. In order to be able in getting best results, use a ½”-¾” roller cover. Consider using a bucket grid and a 5-gallon bucket in larger areas.
12 Photos Gallery of: How to Apply Epoxy Garage Floor Coating
Step four, Start at the floor’s corner by rolling the coating onto a 4′ long x 2′ wide section. Just attach an extension pole onto the roller frame. Step five, The coating is reloaded with the roller and continue to the next section of 4′ x 2′. As you go, then roll back into the applied area previously. Just make sure about rolling over the cut in area as well. Last but not least as step six, Repeat the painting process sections and apply more back rolling until the project is complete.